Adjustable Shuttering Props Manufacturer in Delhi NCR
- Mechanism: Telescopic inner and outer ERW structural steel pipes with threaded collar adjustment
- Safe working load: 2,000 kg to 3,500 kg per prop with 2.5x safety factor
- Height range: 2.0m to 3.75m (standard) and 2.5m to 4.5m (heavy extended models)
- Adjusting nut: Heavy ductile cast iron nut with forged swivel handle for micro-height leveling
Product Overview & Engineering
What are Adjustable Shuttering Props? Adjustable shuttering props (also known as telescopic jack props, acrow props, or steel support jacks) are heavy-duty temporary structural steel columns used in civil construction to support concrete shuttering plates, horizontal runners, and wet concrete slabs during casting and curing. Utilizing two telescoping steel pipes with a coarse pin adjustment and a threaded fine-leveling collar, they provide millimeter-precise height leveling.
Where is it Used? Found on every building construction site across Delhi, Gurugram, Noida, and Faridabad supporting slabs, beams, and lintels.
Key Benefits & Advantages:
• Safely carries up to 3,500 kg per prop with a 2.5 safety factor against buckling.
• Threaded ductile iron collar allows millimeter-precise slab height leveling.
• Eliminates hazardous, non-reusable wooden balli poles, saving 60% in labor and material.
• Fast striking and de-shuttering by turning the collar handle to release pressure.
How Brezz India Manufactures This System: Fabricated from prime Class B ERW structural steel pipes in our Mundka plant. Threaded collars are rolled or cold-cut on heavy outer pipes. Base and top plates are stamped from 6 mm structural steel and continuously welded with heavy fillets. Pins are made from high-tensile alloy steel. Every batch is dipped in protective red-oxide primer.
How We Install on Site: Props are stood vertically on firm ground, the inner tube is pulled up to approximate height and pinned, and the threaded collar handle is rotated clockwise to tighten the prop firmly against the beam or shuttering plate.
Shuttering Props Manufacturers in Delhi
Brezz India Storage Systems is an established shuttering props manufacturer in Delhi, operating a full-scale fabrication facility at Mundka Udyog Nagar, West Delhi. We produce high-strength industrial shuttering props utilizing certified prime-grade hot-rolled and cold-rolled steel (IS 2062 Grade E250 / E350) sourced directly from reputed primary mills including Tata Steel, JSW, and SAIL. Each structural upright, load beam, and shelf panel is crafted through computer-controlled multi-station cold roll-forming and CNC perforation lines, ensuring strict 50 mm modular adjustability and millimeter-accurate tolerances. With our complete in-house pre-treatment (7-tank hot chemical phosphating) and electrostatic thermosetting powder coating line, we eliminate third-party processing delays and pass direct factory pricing to end-user enterprises across Delhi and NCR.
Shuttering Props Suppliers in Delhi NCR
As leading shuttering props suppliers in Delhi NCR, Brezz India delivers turnkey storage implementations across key industrial clusters including Mundka, Mayapuri, Okhla, Bawana, Narela, Gurugram, Manesar, Noida, Greater Noida, Ghaziabad, Sahibabad, Faridabad, Sonipat, Kundli, and Bahadurgarh. We maintain active ready stock of standard upright frames, horizontal step beams, panel shelves, and slotted angle sections to enable emergency 24- to 48-hour dispatches. Our factory-trained erection teams arrive equipped with mechanical floor anchor systems, torque-controlled fasteners, and laser leveling tools to complete defect-free on-site installation with zero disruption to warehouse throughput.
Shuttering Props Wholesalers & Bulk Dealers in Delhi
For 3PL logistics operators, e-commerce fulfillment hubs, commercial infrastructure contractors, and industrial dealers, Brezz India acts as a dependable shuttering props wholesaler in Delhi. We offer tier-based bulk commercial discounts based on total steel tonnage and running bay volume, delivering transparent savings of 15% to 25% compared to intermediary retail traders and local hardware vendors. Every commercial order includes a detailed Bill of Quantities (BOQ), verified Mill Test Certificates (MTC), structural deflection calculations, and complimentary 2D warehouse CAD layout engineering.
Shuttering Props B2B Price Benchmark & Quality Comparison
| Parameter / Feature | Brezz India (Factory Direct) | Open Market / Trader Reseller |
|---|---|---|
| Indicative Price | ₹750 – ₹1,650 per prop | +18% to +30% higher (Trader margin added) |
| Structural Steel Quality | Prime IS 2062 Grade E250 / E350 (Tata / JSW / SAIL tested) | Commercial grade / re-rolled secondary HR steel |
| Anti-Corrosion Surface Finish | 7-Tank hot phosphating + 80µ electrostatic epoxy powder coating | Manual air-dry synthetic enamel spray (prone to flaking) |
| CAD Layout & Load Calculations | Free 2D/3D warehouse CAD floor plan with certified UDL calculations | No engineering drawings; generic rough estimations |
| Turnkey Erection & Anchoring | Factory-certified structural riggers with mechanical floor anchor bolts | Third-party unvetted day labor or customer self-assembly |
Technical Specifications
| Parameter | Specification Details |
|---|---|
| Height Adjustment Ranges | 2.0m to 3.75m (Standard No. 2 Prop), 2.5m to 4.5m (Tall No. 3 Prop) |
| Outer Pipe Specification | 50 mm NB (60.3 mm OD) Class B ERW Steel Pipe (2.5 mm to 3.2 mm wall thickness) |
| Inner Pipe Specification | 40 mm NB (48.3 mm OD) Class B ERW Steel Pipe (2.5 mm to 3.2 mm wall thickness) |
| Safe Working Load | 2,000 kg to 3,500 kg (dependent on extension height) conforming to IS 1161 / IS 1239 |
| Top & Base Plates | 150x150x6 mm flat square steel plates with corner nail holes or stirrup U-head fork |
| Adjusting Nut & Pin | Malleable cast iron heavy-duty threaded sleeve nut with high-tensile steel G-pin |
| Coarse & Fine Adjustment | Coarse adjustment via inner pipe pin holes (100 mm pitch); Fine adjustment via threaded collar |
| Surface Finish | Dipped in anti-rust red-oxide primer or hot-dip galvanized |
Available Sizes & Variants
| Model / Size | Load Capacity | Recommended Application |
|---|---|---|
| Standard Telescopic Prop (2.0m – 3.75m) | 2,500 kg safe load | Standard residential & commercial building slab propping |
| Heavy Extended Prop (2.5m – 4.5m) | 2,000 kg safe load | High-ceiling industrial warehouse sheds & flyover deck staging |
| Stirrup U-Head Prop (Beam Support) | 3,000 kg safe load | Supporting heavy timber / steel runners directly under concrete beams |
How We Manufacture & Install Shuttering Props
Manufacturing at Mundka Plant
-
1
Prime Steel Profiling High tensile IS 2062 Grade E250 / E350 steel slitted and inspected for yield strength consistency.
-
2
CNC Cold Roll-Forming Automated multi-stand cold roll forming lines produce continuous profiles with precise 50 mm pitch perforations.
-
3
7-Tank Pretreatment & Powder Coating Hot chemical phosphating followed by thermosetting epoxy powder coating baked at 200°C.
On-Site Turnkey Installation
-
1
Floor Slab & Laser Plumb Check Optical laser levels assess warehouse concrete floor flatness and plumb lines prior to erection.
-
2
Chemical / Mechanical Anchoring Base plates secured with M12/M16 high-grade anchor bolts embedded into the industrial concrete slab.
-
3
Safety Locks & Load Signage Spring-loaded safety pins prevent beam dislodgement, followed by certified UDL load signage.
Shuttering Props FAQs
Request Factory Quote
Receive a complete BOQ & 2D CAD layout within 24 hours.