Cantilever Rack Manufacturer in Delhi NCR
- Design: Column with cantilever arms for unobstructed horizontal storage
- Load capacity: 500 kg to 3,000 kg per cantilever arm
- Storage types: Steel pipes, plastic conduits, timber planks, sheet metal, furniture
- Configuration: Single-sided (wall-mounted) or double-sided central island
Product Overview & Engineering
What is a Cantilever Rack? Cantilever racking is specialized industrial storage designed specifically for long, bulky, or awkwardly shaped materials such as steel pipes, timber planks, PVC conduits, sheet metal packs, and aluminum extrusions. Built with heavy central structural steel vertical columns and horizontal cantilever arms extending outward, it provides continuous, completely unobstructed horizontal storage with no front column interference.
Where is it Used? Heavily utilized in steel stockyards across Mayapuri, Mundka, and Ghaziabad, building materials distribution centers, pipe extrusion manufacturing units, and timber yards.
Key Benefits & Advantages:
• Zero front columns allows effortless loading of 6-meter and 12-meter long materials.
• Available in single-sided (placed against a wall) and double-sided (central aisle access) configurations.
• Arms adjust vertically on 100 mm pitch with heavy-duty Grade 8.8 bolts or drop-in pivot pins.
• Integrated 2-degree upward arm safety tilt and removable end-stops prevent pipes from rolling off.
How Brezz India Manufactures This System: Vertical columns and base foundations are fabricated from heavy ISMB structural I-beams in our Mundka plant. Cantilever arms are tapered toward the tip to optimize steel weight and load distribution. Heavy gusset plates are welded to the base to transfer cantilever bending moments safely into the concrete foundation slab.
How We Install on Site: Heavy column base plates are chemical-anchored with M20/M24 foundation anchors. Cross-bracing frames are bolted between adjacent columns to form a rigid structural wall, arms are pinned at your desired levels, and pipe-retaining end-stops are secured.
Cantilever Rack Manufacturers in Delhi
Brezz India Storage Systems is an established cantilever rack manufacturer in Delhi, operating a full-scale fabrication facility at Mundka Udyog Nagar, West Delhi. We produce high-strength industrial cantilever rack utilizing certified prime-grade hot-rolled and cold-rolled steel (IS 2062 Grade E250 / E350) sourced directly from reputed primary mills including Tata Steel, JSW, and SAIL. Each structural upright, load beam, and shelf panel is crafted through computer-controlled multi-station cold roll-forming and CNC perforation lines, ensuring strict 50 mm modular adjustability and millimeter-accurate tolerances. With our complete in-house pre-treatment (7-tank hot chemical phosphating) and electrostatic thermosetting powder coating line, we eliminate third-party processing delays and pass direct factory pricing to end-user enterprises across Delhi and NCR.
Cantilever Rack Suppliers in Delhi NCR
As leading cantilever rack suppliers in Delhi NCR, Brezz India delivers turnkey storage implementations across key industrial clusters including Mundka, Mayapuri, Okhla, Bawana, Narela, Gurugram, Manesar, Noida, Greater Noida, Ghaziabad, Sahibabad, Faridabad, Sonipat, Kundli, and Bahadurgarh. We maintain active ready stock of standard upright frames, horizontal step beams, panel shelves, and slotted angle sections to enable emergency 24- to 48-hour dispatches. Our factory-trained erection teams arrive equipped with mechanical floor anchor systems, torque-controlled fasteners, and laser leveling tools to complete defect-free on-site installation with zero disruption to warehouse throughput.
Cantilever Rack Wholesalers & Bulk Dealers in Delhi
For 3PL logistics operators, e-commerce fulfillment hubs, commercial infrastructure contractors, and industrial dealers, Brezz India acts as a dependable cantilever rack wholesaler in Delhi. We offer tier-based bulk commercial discounts based on total steel tonnage and running bay volume, delivering transparent savings of 15% to 25% compared to intermediary retail traders and local hardware vendors. Every commercial order includes a detailed Bill of Quantities (BOQ), verified Mill Test Certificates (MTC), structural deflection calculations, and complimentary 2D warehouse CAD layout engineering.
Cantilever Rack B2B Price Benchmark & Quality Comparison
| Parameter / Feature | Brezz India (Factory Direct) | Open Market / Trader Reseller |
|---|---|---|
| Indicative Price | ₹3,200 – ₹7,500 per arm position | +18% to +30% higher (Trader margin added) |
| Structural Steel Quality | Prime IS 2062 Grade E250 / E350 (Tata / JSW / SAIL tested) | Commercial grade / re-rolled secondary HR steel |
| Anti-Corrosion Surface Finish | 7-Tank hot phosphating + 80µ electrostatic epoxy powder coating | Manual air-dry synthetic enamel spray (prone to flaking) |
| CAD Layout & Load Calculations | Free 2D/3D warehouse CAD floor plan with certified UDL calculations | No engineering drawings; generic rough estimations |
| Turnkey Erection & Anchoring | Factory-certified structural riggers with mechanical floor anchor bolts | Third-party unvetted day labor or customer self-assembly |
Technical Specifications
| Parameter | Specification Details |
|---|---|
| Column Heights | 2,500 mm up to 8,000 mm |
| Arm Lengths | 600 mm, 800 mm, 1,000 mm, 1,200 mm, 1,500 mm, 1,800 mm |
| Arm Load Ratings | 500 kg, 1,000 kg, 1,500 kg, 2,000 kg up to 3,000 kg per arm |
| Column Profile | Heavy Structural Steel I-Beam (ISMB 150 to ISMB 350) or fabricated box section |
| Base Connection | Heavy-duty welded base plate with diagonal stiffener gussets |
| Arm Incline | 2° upward safety incline to prevent round pipes from rolling off |
| Steel Grade | IS 2062 Grade Prime Heavy Structural Steel |
| Finishing | 7-Tank Pre-Treatment + High-Impact Powder Coating or Hot-Dip Galvanizing |
Available Sizes & Variants
| Model / Size | Load Capacity | Recommended Application |
|---|---|---|
| Light Cantilever (500 kg/arm) | 500 kg / arm | PVC pipes, aluminum extrusions, timber moldings & conduit |
| Medium Cantilever (1000 kg/arm) | 1,000 kg / arm | MS hollow pipes, wooden boards & furniture panels |
| Heavy Cantilever (2000 kg+/arm) | 2,000 kg+ / arm | Solid steel round bars, structural steel channels & heavy dies |
How We Manufacture & Install Cantilever Rack
Manufacturing at Mundka Plant
-
1
Prime Steel Profiling High tensile IS 2062 Grade E250 / E350 steel slitted and inspected for yield strength consistency.
-
2
CNC Cold Roll-Forming Automated multi-stand cold roll forming lines produce continuous profiles with precise 50 mm pitch perforations.
-
3
7-Tank Pretreatment & Powder Coating Hot chemical phosphating followed by thermosetting epoxy powder coating baked at 200°C.
On-Site Turnkey Installation
-
1
Floor Slab & Laser Plumb Check Optical laser levels assess warehouse concrete floor flatness and plumb lines prior to erection.
-
2
Chemical / Mechanical Anchoring Base plates secured with M12/M16 high-grade anchor bolts embedded into the industrial concrete slab.
-
3
Safety Locks & Load Signage Spring-loaded safety pins prevent beam dislodgement, followed by certified UDL load signage.
Cantilever Rack FAQs
Request Factory Quote
Receive a complete BOQ & 2D CAD layout within 24 hours.