Semi Electric Stacker Manufacturer in Delhi NCR
- Lifting: Battery-powered electric hydraulic power pack for effortless push-button lifting
- Travel: Manual push and pull for precise positioning in tight warehouse aisles
- Capacity: 1,000 kg (1 Ton) to 2,000 kg (2 Ton) load rating
- Lift heights: 1,600 mm up to 3,500 mm duplex telescopic mast
Product Overview & Engineering
What is a Semi Electric Stacker? A semi electric stacker combines the speed and ergonomic ease of battery-powered electric hydraulic lifting with the simplicity and low cost of manual horizontal pushing. An operator presses a fingertip lever to effortlessly elevate pallets up to 3.5 meters high in seconds, then guides the stacker smoothly into the rack position.
Where is it Used? The preferred lifting machine for medium-throughput warehouses in Gurgaon, Kundli, and Noida where lifting 20 to 60 pallets daily is required without investing in a costly forklift.
Key Benefits & Advantages:
• Lifts a 1.5-ton pallet to full 3-meter height in under 35 seconds at the touch of a lever.
• Eliminates physical operator fatigue associated with manual hydraulic pumping.
• Plugs into standard 220V single-phase electrical wall sockets for overnight charging.
• Compact turning radius operates in narrow 2.1-meter aisles.
How Brezz India Manufactures This System: Masts are fabricated from heavy hot-rolled C-channel steel. The 1.6 kW DC hydraulic power pack is mounted inside a protective steel shroud with an integrated battery meter. Dual heavy-duty leaf chains provide a 5:1 safety factor. All units are finished with 80-micron powder coating in our Mundka plant.
How We Install on Site: Delivered fully assembled with battery charged and calibrated, ready for immediate operation.
Semi Electric Stacker Manufacturers in Delhi
Brezz India Storage Systems is an established semi electric stacker manufacturer in Delhi, operating a full-scale fabrication facility at Mundka Udyog Nagar, West Delhi. We produce high-strength industrial semi electric stacker utilizing certified prime-grade hot-rolled and cold-rolled steel (IS 2062 Grade E250 / E350) sourced directly from reputed primary mills including Tata Steel, JSW, and SAIL. Each structural upright, load beam, and shelf panel is crafted through computer-controlled multi-station cold roll-forming and CNC perforation lines, ensuring strict 50 mm modular adjustability and millimeter-accurate tolerances. With our complete in-house pre-treatment (7-tank hot chemical phosphating) and electrostatic thermosetting powder coating line, we eliminate third-party processing delays and pass direct factory pricing to end-user enterprises across Delhi and NCR.
Semi Electric Stacker Suppliers in Delhi NCR
As leading semi electric stacker suppliers in Delhi NCR, Brezz India delivers turnkey storage implementations across key industrial clusters including Mundka, Mayapuri, Okhla, Bawana, Narela, Gurugram, Manesar, Noida, Greater Noida, Ghaziabad, Sahibabad, Faridabad, Sonipat, Kundli, and Bahadurgarh. We maintain active ready stock of standard upright frames, horizontal step beams, panel shelves, and slotted angle sections to enable emergency 24- to 48-hour dispatches. Our factory-trained erection teams arrive equipped with mechanical floor anchor systems, torque-controlled fasteners, and laser leveling tools to complete defect-free on-site installation with zero disruption to warehouse throughput.
Semi Electric Stacker Wholesalers & Bulk Dealers in Delhi
For 3PL logistics operators, e-commerce fulfillment hubs, commercial infrastructure contractors, and industrial dealers, Brezz India acts as a dependable semi electric stacker wholesaler in Delhi. We offer tier-based bulk commercial discounts based on total steel tonnage and running bay volume, delivering transparent savings of 15% to 25% compared to intermediary retail traders and local hardware vendors. Every commercial order includes a detailed Bill of Quantities (BOQ), verified Mill Test Certificates (MTC), structural deflection calculations, and complimentary 2D warehouse CAD layout engineering.
Semi Electric Stacker B2B Price Benchmark & Quality Comparison
| Parameter / Feature | Brezz India (Factory Direct) | Open Market / Trader Reseller |
|---|---|---|
| Indicative Price | ₹55,000 – ₹98,000 per unit | +18% to +30% higher (Trader margin added) |
| Structural Steel Quality | Prime IS 2062 Grade E250 / E350 (Tata / JSW / SAIL tested) | Commercial grade / re-rolled secondary HR steel |
| Anti-Corrosion Surface Finish | 7-Tank hot phosphating + 80µ electrostatic epoxy powder coating | Manual air-dry synthetic enamel spray (prone to flaking) |
| CAD Layout & Load Calculations | Free 2D/3D warehouse CAD floor plan with certified UDL calculations | No engineering drawings; generic rough estimations |
| Turnkey Erection & Anchoring | Factory-certified structural riggers with mechanical floor anchor bolts | Third-party unvetted day labor or customer self-assembly |
Technical Specifications
| Parameter | Specification Details |
|---|---|
| Lifting Mechanism | Electro-Hydraulic DC Motor (1.6 kW) with push-button up/down lever |
| Horizontal Travel | Manual push and pull by operator |
| Rated Load Capacities | 1,000 kg (1.0T), 1,500 kg (1.5T), 2,000 kg (2.0T) |
| Maximum Lift Heights | 1,600 mm (single mast) / 2,500 mm / 3,000 mm / 3,500 mm (duplex mast) |
| Lifting Speed | 60 mm/s (loaded) to 80 mm/s (unloaded) |
| Battery Specification | Heavy-Duty 12V / 120Ah Industrial Traction Battery |
| Charger | Integrated intelligent automatic battery charger (plugs into 220V wall outlet) |
| Safety Features | Emergency power cut-off button, overload bypass valve, wheel brake lock |
Available Sizes & Variants
| Model / Size | Load Capacity | Recommended Application |
|---|---|---|
| 1.0 Ton / 2.5m Semi-Electric Stacker | 1,000 kg | Fast truck unloading & medium racking in retail distribution |
| 1.5 Ton / 3.0m Semi-Electric Stacker | 1,500 kg | General industrial warehouse pallet stacking & mezzanine loading |
| 2.0 Ton / 3.5m Heavy Duty Model | 2,000 kg | Heavy manufacturing plant pallet staging & container destuffing |
How We Manufacture & Install Semi Electric Stacker
Manufacturing at Mundka Plant
-
1
Prime Steel Profiling High tensile IS 2062 Grade E250 / E350 steel slitted and inspected for yield strength consistency.
-
2
CNC Cold Roll-Forming Automated multi-stand cold roll forming lines produce continuous profiles with precise 50 mm pitch perforations.
-
3
7-Tank Pretreatment & Powder Coating Hot chemical phosphating followed by thermosetting epoxy powder coating baked at 200°C.
On-Site Turnkey Installation
-
1
Floor Slab & Laser Plumb Check Optical laser levels assess warehouse concrete floor flatness and plumb lines prior to erection.
-
2
Chemical / Mechanical Anchoring Base plates secured with M12/M16 high-grade anchor bolts embedded into the industrial concrete slab.
-
3
Safety Locks & Load Signage Spring-loaded safety pins prevent beam dislodgement, followed by certified UDL load signage.
Semi Electric Stacker FAQs
Request Factory Quote
Receive a complete BOQ & 2D CAD layout within 24 hours.