Industrial Goods Lift & Freight Elevator Manufacturer in Delhi NCR
- Capacity: 500 kg to 5,000 kg (5 Ton) heavy material lifting capacity
- Lift heights: 3 meters (G+1 mezzanine) up to 15 meters (multi-floor factories)
- Drive: Hydraulic cylinder wire-rope multiplying system or heavy traction hoist
- Safety: Interlocked landing door locks, cage drop arrestors & overload relief valves
Product Overview & Engineering
What is an Industrial Goods Lift? An industrial goods lift (or hydraulic freight elevator) is a heavy-duty vertical material transfer platform designed to transport palletized goods, heavy machinery parts, and cartons between warehouse ground floors and upper mezzanine levels or multi-story factory floors. Unlike passenger lifts, it is engineered specifically for heavy point loads and forklift loading.
Where is it Used? Heavily installed in manufacturing factories across Mayapuri and Bawana, multi-tier warehouse mezzanines in Gurugram and Kundli, and auto spare parts stockrooms across Delhi NCR.
Key Benefits & Advantages:
• Eliminates dangerous, slow manual stair-carrying of heavy industrial materials.
• Requires no overhead civil motor room and needs only a shallow 150 mm floor pit (or ramp).
• Electro-mechanical door interlocks ensure the cage cannot move unless all doors are locked shut.
• Emergency manual lowering valve allows lowering the platform safely during power cuts.
How Brezz India Manufactures This System: Vertical guide columns are fabricated from heavy ISMB structural steel I-beams in our Mundka plant. The cage platform is built with heavy chequered steel floors and structural tubular framing. Hydraulic cylinders are hard chrome-plated and equipped with dual 4-fall steel wire ropes. Coated in industrial safety blue and yellow epoxy enamel.
How We Install on Site: Guide columns are chemical-anchored to building walls or mezzanine frames, platform cage is hoisted and aligned, hydraulic power pack and push-button landing control panels are wired, and safety door interlocks are certified.
Goods Lift Manufacturers in Delhi
Brezz India Storage Systems is an established goods lift manufacturer in Delhi, operating a full-scale fabrication facility at Mundka Udyog Nagar, West Delhi. We produce high-strength industrial goods lift utilizing certified prime-grade hot-rolled and cold-rolled steel (IS 2062 Grade E250 / E350) sourced directly from reputed primary mills including Tata Steel, JSW, and SAIL. Each structural upright, load beam, and shelf panel is crafted through computer-controlled multi-station cold roll-forming and CNC perforation lines, ensuring strict 50 mm modular adjustability and millimeter-accurate tolerances. With our complete in-house pre-treatment (7-tank hot chemical phosphating) and electrostatic thermosetting powder coating line, we eliminate third-party processing delays and pass direct factory pricing to end-user enterprises across Delhi and NCR.
Goods Lift Suppliers in Delhi NCR
As leading goods lift suppliers in Delhi NCR, Brezz India delivers turnkey storage implementations across key industrial clusters including Mundka, Mayapuri, Okhla, Bawana, Narela, Gurugram, Manesar, Noida, Greater Noida, Ghaziabad, Sahibabad, Faridabad, Sonipat, Kundli, and Bahadurgarh. We maintain active ready stock of standard upright frames, horizontal step beams, panel shelves, and slotted angle sections to enable emergency 24- to 48-hour dispatches. Our factory-trained erection teams arrive equipped with mechanical floor anchor systems, torque-controlled fasteners, and laser leveling tools to complete defect-free on-site installation with zero disruption to warehouse throughput.
Goods Lift Wholesalers & Bulk Dealers in Delhi
For 3PL logistics operators, e-commerce fulfillment hubs, commercial infrastructure contractors, and industrial dealers, Brezz India acts as a dependable goods lift wholesaler in Delhi. We offer tier-based bulk commercial discounts based on total steel tonnage and running bay volume, delivering transparent savings of 15% to 25% compared to intermediary retail traders and local hardware vendors. Every commercial order includes a detailed Bill of Quantities (BOQ), verified Mill Test Certificates (MTC), structural deflection calculations, and complimentary 2D warehouse CAD layout engineering.
Goods Lift B2B Price Benchmark & Quality Comparison
| Parameter / Feature | Brezz India (Factory Direct) | Open Market / Trader Reseller |
|---|---|---|
| Indicative Price | ₹195,000 – ₹550,000 per unit | +18% to +30% higher (Trader margin added) |
| Structural Steel Quality | Prime IS 2062 Grade E250 / E350 (Tata / JSW / SAIL tested) | Commercial grade / re-rolled secondary HR steel |
| Anti-Corrosion Surface Finish | 7-Tank hot phosphating + 80µ electrostatic epoxy powder coating | Manual air-dry synthetic enamel spray (prone to flaking) |
| CAD Layout & Load Calculations | Free 2D/3D warehouse CAD floor plan with certified UDL calculations | No engineering drawings; generic rough estimations |
| Turnkey Erection & Anchoring | Factory-certified structural riggers with mechanical floor anchor bolts | Third-party unvetted day labor or customer self-assembly |
Technical Specifications
| Parameter | Specification Details |
|---|---|
| Lifting Capacity | 500 kg, 1,000 kg, 2,000 kg, 3,000 kg, 5,000 kg (5 Ton) |
| Travel Heights | Up to 15 meters (Serving Ground + 1, 2, 3, 4 upper floors or mezzanines) |
| Platform Cage Sizes | 1,500x1,500 mm, 2,000x2,000 mm, 2,500x2,500 mm, custom dimensions |
| Lifting Mechanism | Heavy hydraulic cylinder with dual 4-fall steel wire ropes and leaf chains |
| Operating Speed | 0.15 m/s to 0.25 m/s smooth vertical travel |
| Guide Columns | Heavy structural steel H-beams / ISMC channels anchored to building wall |
| Safety Interlocks | Electro-mechanical door locks (lift operates only when all doors are closed and locked) |
| Power Supply | 3-Phase 415V AC hydraulic power pack with emergency manual lowering valve |
Available Sizes & Variants
| Model / Size | Load Capacity | Recommended Application |
|---|---|---|
| Mezzanine Goods Lift (1.0 Ton / G+1) | 1,000 kg | Transferring palletized stock to second floor warehouse mezzanine |
| Multi-Floor Factory Goods Lift (2.0 Ton / G+3) | 2,000 kg | Manufacturing raw materials & finished goods movement across floors |
| Heavy Duty Industrial Freight Lift (5.0 Ton) | 5,000 kg | Heavy machinery components, sheet metal dies & automotive parts |
How We Manufacture & Install Goods Lift
Manufacturing at Mundka Plant
-
1
Prime Steel Profiling High tensile IS 2062 Grade E250 / E350 steel slitted and inspected for yield strength consistency.
-
2
CNC Cold Roll-Forming Automated multi-stand cold roll forming lines produce continuous profiles with precise 50 mm pitch perforations.
-
3
7-Tank Pretreatment & Powder Coating Hot chemical phosphating followed by thermosetting epoxy powder coating baked at 200°C.
On-Site Turnkey Installation
-
1
Floor Slab & Laser Plumb Check Optical laser levels assess warehouse concrete floor flatness and plumb lines prior to erection.
-
2
Chemical / Mechanical Anchoring Base plates secured with M12/M16 high-grade anchor bolts embedded into the industrial concrete slab.
-
3
Safety Locks & Load Signage Spring-loaded safety pins prevent beam dislodgement, followed by certified UDL load signage.
Goods Lift FAQs
Request Factory Quote
Receive a complete BOQ & 2D CAD layout within 24 hours.